A simulator for simulating and improving technology in a kayak-two with a moving trolley. It is intended for the development and improvement of the crew rowing technique, development of coordination of the partner's movements and feelings, as well as for the development of special physical training of athletes and testing for special physical fitness in kayaking. When working on this simulator, athletes must sit on a slide (a seat similar to the seat located in a kayak two in smooth water) attached to a cart on 10 wheels, move forward and backward along the frame, performing the same movements as in a boat on smooth water.

The simulator is made of a steel profile, a steel shaft, a cast-iron pulley with accessories from cables and a rubber bundle.

The simulator has an aerodynamic load block for the possibility of reducing or increasing the force on the "paddle" during operation. The simulator is equipped with a moving trolley. The cart on special rollers must move along the bed without external interference.

Together with the simulator, a set of loads of 4 pcs. 2 kg each 1 kg, 2 pcs. 0.5 kg each.

A simulator for simulating and improving the technique of kayaking with a moving trolley, designed to develop the technique of rowing on a kayak, as well as for the development of special physical training and testing athletes. When working on this simulator, an athlete must sit on a side view (a seat similar to a device located in a kayak alone on smooth water), attached to a cart on 8 wheels, to move forward and backward along the frame.

The simulator is made of a steel profile, a steel shaft, a cast-iron pulley with accessories from cables and a rubber bundle. The simulator has an aerodynamic load block, to reduce or increase the force on the "paddle" during the athlete's work. The simulator is equipped with a moving trolley. The cart on special rollers must move along the bed without external interference.

A set of weights is supplied with the simulator: 2 pcs. 2 kg each, 1 pc. 1 kg, 1 pc. 0.5 kg. Length 2.5 - 2.6m; Width - 0.6m; The weight of the simulator is 50-60 kg.

A simulator for simulating and improving the technique of kayaking. With this unique equipment you can:

-Diagnose the functional state of the body of athletes;

-conduct competitions and training, regardless of the availability of a suitable reservoir;

-increase the effectiveness of training athletes by introducing new principles of the training process.

The rowing machine allows you to optimize the training process when it is impossible to go out to the water. This development is aimed both at professional athletes in kayaking and canoeing, rowing slalom, and for lovers who in the winter period are forced to refrain from training in smooth water for several months.

A simulator for simulating and improving technology in a canoe-two with a moving trolley. It is intended for the development and improvement of the crew rowing technique, the development of coordination of the partner's movements and feelings, as well as for the development of special physical training of athletes and testing for special physical fitness in canoeing. When working on this simulator, athletes should, standing on their knees on a special platform attached to a trolley with 10 wheels, move along the bed forward and backward, performing the same movements as in a boat on smooth water.

The simulator is made of a steel profile, a steel shaft, a cast-iron pulley with accessories from cables and a rubber bundle.

The simulator has an aerodynamic load block for the possibility of reducing or increasing the force on the "paddle" during operation. The simulator is equipped with a moving trolley. The cart on special rollers must move along the bed without external interference.

Together with the simulator, a set of loads of 4 pcs. 2 kg each 1 kg, 2 pcs. 0.5 kgeach.

A simulator for simulating and improving canoeing technique with a moving trolley, designed to develop canoeing technique, as well as to develop special physical training and conduct testing of athletes. When working on this simulator, the athlete should, standing on his knee on a special platform attached to the trolley on 4 wheels, move along the bed forward and backward.

The simulator is made of a steel profile, a steel shaft, a cast-iron pulley with accessories from cables and a rubber bundle. The simulator has an aerodynamic load block, to reduce or increase the force on the "paddle" during the athlete's work. The simulator is equipped with a moving trolley. The cart on special rollers must move along the bed without external interference.

A set of weights is supplied with the simulator: 2 pcs. 2 kg each, 1 pc. 1 kg, 1 pc. 0.5 kg. Length 4m; Width - 0.6m; The weight of the simulator is 70 - 80 kg.

Complete set:

- a frame adjustable in height (length – 5 m),

- a canoe cart, a canoe paddle hand grip,

- a returnable rubber.

A simulator for simulating and improving rowing techniques. Designed for the development and improvement of rowing techniques, as well as for the development of special physical training of athletes and testing athletes for special physical fitness of slalom rowers. When working on this simulator, an athlete must, standing on a special platform, perform similar movements as in a boat.

The simulator should be made of steel profile, steel shaft, cast-iron pulley with accessories from cables and rubber harness.

The simulator has an aerodynamic load block, which reduces or increases the force on the "paddle", a bed, a canoe paddle simulator, an emphasis for feet, adjustable depending on the anthropometric data of the athlete.

A simulator for simulating and improving the technique of kayaking with a moving trolley, designed to develop the technique of rowing on a kayak, as well as for the development of special physical training and testing athletes. When working on this simulator, an athlete must sit on a side view (a seat similar to a device located in a kayak alone on smooth water), attached to a cart on 8 wheels, to move forward and backward along the frame.

The simulator is made of a steel profile, a steel shaft, a cast-iron pulley with accessories from cables and a rubber bundle. The simulator has an aerodynamic load block, to reduce or increase the force on the "paddle" during the athlete's work. The simulator is equipped with a moving trolley. The cart on special rollers must move along the bed without external interference.

A set of weights is supplied with the simulator: 2 pcs. 2 kg each, 1 pc. 1 kg, 1 pc. 0.5 kg. Length 2.5 - 2.6m; Width - 0.6m; The weight of the simulator is 50-60 kg.

Simulator for simulating and improving kayaking equipment. Designed to develop and improve the technique of kayaking, as well as for the development of special physical training of athletes and testing for special physical fitness in kayaking. When working on this simulator, an athlete must sit on a side view (a seat similar to a seat located in a kayak alone in smooth water) to perform similar movements as in a boat in smooth water.

The simulator is made of a steel profile, a steel shaft, a cast-iron pulley with accessories from cables and a rubber bundle.

The simulator has an aerodynamic load block for the possibility of reducing or increasing the force on the "paddle" during operation.

Simulator for simulating and improving rowing techniques. Designed for the development and improvement of SUP Board rowing techniques, as well as for the development of special physical training. When working on this simulator, you need to stand on a special platform to perform similar movements as on a Board on smooth water.

Simulator for simulating and improving rowing techniques. With this simulator, you can correctly learn how to transfer force through your legs, which is very difficult to do on the water. Designed for the development and improvement of SUP Board rowing techniques, as well as for the development of special physical training. When working on this simulator, you need to stand on a special platform to perform similar movements as on a Board on smooth water.

The simulator is equipped with a mechanical load block, for uniform traction force during the athlete's work; The force must be regulated by means of a felt brake, due to the clamping of the disk rotating on the shaft by the pads.
The set includes removable hooks for installation on the Swedish wall. As well as a bag for storage and transportation made of PVC fabric, which will protect the equipment from moisture.

Sizes:
Width: 42 cm
Length: 25 cm
Height: 31 cm
Weight: 9 kg 400g

A simulator for simulating and improving rowing techniques. Designed for the development and improvement of the technique of dragon rowing, as well as for the development of special physical training for athletes and testing athletes for special physical fitness in rowing with dragons. When working on this simulator, the athlete, sitting on a special platform, must perform similar movements as in a boat on smooth water.

The simulator should be made of steel profile, steel shaft, cast-iron pulley with accessories from cables and rubber harness.

The simulator has an aerodynamic load block that reduces or increases the force on the "paddle", a bed, an oar simulator for the dragon, an emphasis for the "front" leg and an emphasis for the "back" leg.

The simulator is equipped with a mechanical load block, for uniform traction force during the athlete's work; The force must be regulated by means of a felt brake, due to the clamping of the disk rotating on the shaft by the pads.

The set includes removable hooks for installation on the Swedish wall. As well as a bag for storage and transportation made of PVC fabric, which will protect the equipment from moisture.

Sizes:
Width: 42 cm
Length: 25 cm
Height: 31 cm
Weight: 9 kg 400 g

Simulator has an aerodynamic load block, additionally there is a magnetic brake.

The simulator provides adjustment of the guide rollers both vertically and horizontally, for more effective use by athletes. This function allows you to adjust the simulator for your sport, as well as for your anthropometric data.

Additionally, you can complete the simulator:

• paddle for SUP surfing
• spring-loaded platform for SAP surfing
• canoe paddle
• paddle kayak

Sizes:
Width: 650 mm
Length: 360 mm
Height: 360 mm
Weight: 20 kg 800 g