YOU AIM HIGH AND ARE USED TO SHOOT FOR THE STARS, THEN USM SIMULATORS ARE FOR YOU – IT'S THE WINNERS' CHOICE
USM exercise machines are the best kayak-canoe ergometers, which were designed specifically for the athletes. Thanks to their unique design, the simulatorsare suitable to drill all the moves of rowing. With them your trainings become more effective.
Simulators from USM company
We have a wide range of training equipment for rowing. We are sure that here you will find a simulator for yourself.
A simulator for simulating and improving technology in a kayak-two with a moving trolley. It is intended for the development and improvement of the crew rowing technique, development of coordination of the partner's movements and feelings, as well as for the development of special physical training of athletes and testing for special physical fitness in kayaking. When working on this simulator, athletes must sit on a slide (a seat similar to the seat located in a kayak two in smooth water) attached to a cart on 10 wheels, move forward and backward along the frame, performing the same movements as in a boat on smooth water.
The simulator is made of a steel profile, a steel shaft, a cast-iron pulley with accessories from cables and a rubber bundle.
The simulator has an aerodynamic load block for the possibility of reducing or increasing the force on the "paddle" during operation. The simulator is equipped with a moving trolley. The cart on special rollers must move along the bed without external interference.
Together with the simulator, a set of loads of 4 pcs. 2 kg each 1 kg, 2 pcs. 0.5 kg each.
Ironkayak
A simulator for simulating and improving the technique of kayaking with a moving trolley, designed to develop the technique of rowing on a kayak, as well as for the development of special physical training and testing athletes. When working on this simulator, an athlete must sit on a side view (a seat similar to a device located in a kayak alone on smooth water), attached to a cart on 8 wheels, to move forward and backward along the frame.
The simulator is made of a steel profile, a steel shaft, a cast-iron pulley with accessories from cables and a rubber bundle. The simulator has an aerodynamic load block, to reduce or increase the force on the "paddle" during the athlete's work. The simulator is equipped with a moving trolley. The cart on special rollers must move along the bed without external interference.
A set of weights is supplied with the simulator: 2 pcs. 2 kg each, 1 pc. 1 kg, 1 pc. 0.5 kg. Length 2.5 - 2.6m; Width - 0.6m; The weight of the simulator is 50-60 kg.
Ironkayak on wheels
A simulator for simulating and improving the technique of kayaking. With this unique equipment you can:
-Diagnose the functional state of the body of athletes;
-conduct competitions and training, regardless of the availability of a suitable reservoir;
-increase the effectiveness of training athletes by introducing new principles of the training process.
The rowing machine allows you to optimize the training process when it is impossible to go out to the water. This development is aimed both at professional athletes in kayaking and canoeing, rowing slalom, and for lovers who in the winter period are forced to refrain from training in smooth water for several months.
K-1 Compact PRO
Simulator for simulating and improving kayaking equipment. Designed to develop and improve the technique of kayaking, as well as for the development of special physical training of athletes and testing for special physical fitness in kayaking. When working on this simulator, an athlete must sit on a side view (a seat similar to a seat located in a kayak alone in smooth water) to perform similar movements as in a boat in smooth water.
The simulator is made of a steel profile, a steel shaft, a cast-iron pulley with accessories from cables and a rubber bundle.
The simulator has an aerodynamic load block for the possibility of reducing or increasing the force on the "paddle" during operation.
K-1 Driveway
The simulator allows the athlete to feel the transfer of force from the paddle to the boat. The development of special strength training.
Options: height-adjustable bed length - 3 m, trolley "kayak", forend "kayak", returnable rubber
Combined training machine (canoe and kayak)
A simulator for simulating and improving canoeing and kayaking techniques. Designed to develop and improve crew rowing techniques, as well as to develop special physical training for athletes and conduct testing on special physical fitness in canoeing. When working on this simulator, athletes must, for a canoeist: standing on a knee on a special platform attached to a trolley on 4 wheels, move along the bed forward and backward, performing the same movements as in a boat on smooth water. For a kayaker: when working on this simulator, athletes must sit on a slide (a seat similar to the seat located in a kayak two in smooth water) attached to a cart on 4 wheels, move forward and backward along the frame, performing the same movements as in a boat on smooth water.
The simulator is made of a steel profile, a steel shaft, a cast-iron pulley with accessories from cables and a rubber bundle.
The simulator has an aerodynamic load block for the possibility of reducing or increasing the force on the "paddle" during operation. The simulator is equipped with a moving kayak cart and a canoe cart. 2 oars are also supplied: for canoeing and kayaking. The trolley on special rollers must move on the bed without external interference.
Together with the simulator, a set of loads of 2 pcs. 2 kg each, 1 pc. 1 kg, 1 pc. 0.5 kg each.
K-1 STR
Simulator for simulating and improving kayaking equipment. Designed to develop and improve the technique of kayaking, as well as for the development of special physical training of athletes and testing for special physical fitness in kayaking.
The simulator allows the athlete to feel the transfer of force from the paddle to the boat. The development of special strength training.
A special roller is installed on the back of the bed, through which the trolley is attached to the simulator lower unit, to work with maximum weights.
Kayaking platform (attachable to the bottom block)
It can be used in various variations. For productive training of special muscles, using the lower block Simulator. For stretching, debugging techniques, and many other variations.
K-1 Driveway PRO
Complete set: - a frame adjustable in height (length - 3 m) - a kayak cart, a kayak paddle hand grip - a returnable rubber
K-1 Compact FIT
It is intended for the advancing and improving canoeing technique, as well as for the developing a special physical training of kayakers and testing for a special physical condition in kayaking. When working on this training machine, a kayaker must sit on a sliding seat (a seat similar to the seat located in a single kayak in smooth water) attached to a cart with 10 wheels, and perform the same movements as in a kayak in smooth water.
The training machine is made of a steel profile, a steel shaft, a cast-iron pulley fitted with wire ropes and a rubber band.
The training machine has an aerodynamic load block allowing to reduce or increase force on the "paddle" when working. It is equipped with a moving cart. This cart must move on special rollers along the frame without external interference.
A simulator for simulating and improving technology in a canoe-two with a moving trolley. It is intended for the development and improvement of the crew rowing technique, the development of coordination of the partner's movements and feelings, as well as for the development of special physical training of athletes and testing for special physical fitness in canoeing. When working on this simulator, athletes should, standing on their knees on a special platform attached to a trolley with 10 wheels, move along the bed forward and backward, performing the same movements as in a boat on smooth water.
The simulator is made of a steel profile, a steel shaft, a cast-iron pulley with accessories from cables and a rubber bundle.
The simulator has an aerodynamic load block for the possibility of reducing or increasing the force on the "paddle" during operation. The simulator is equipped with a moving trolley. The cart on special rollers must move along the bed without external interference.
Together with the simulator, a set of loads of 4 pcs. 2 kg each 1 kg, 2 pcs. 0.5 kgeach.
Ironcanoe
A simulator for simulating and improving canoeing technique with a moving trolley, designed to develop canoeing technique, as well as to develop special physical training and conduct testing of athletes. When working on this simulator, the athlete should, standing on his knee on a special platform attached to the trolley on 4 wheels, move along the bed forward and backward.
The simulator is made of a steel profile, a steel shaft, a cast-iron pulley with accessories from cables and a rubber bundle. The simulator has an aerodynamic load block, to reduce or increase the force on the "paddle" during the athlete's work. The simulator is equipped with a moving trolley. The cart on special rollers must move along the bed without external interference.
A set of weights is supplied with the simulator: 2 pcs. 2 kg each, 1 pc. 1 kg, 1 pc. 0.5 kg. Length 4m; Width - 0.6m; The weight of the simulator is 70 - 80 kg.
C-1 Driveway PRO
The simulator allows the athlete to feel the transfer of force from the paddle to the boat. The development of special strength training.
Options: height-adjustable bed length - 5 m, trolley "canoe", forend "canoe"
Combined training machine (canoe and kayak)
A simulator for simulating and improving canoeing and kayaking techniques. Designed to develop and improve crew rowing techniques, as well as to develop special physical training for athletes and conduct testing on special physical fitness in canoeing. When working on this simulator, athletes must, for a canoeist: standing on a knee on a special platform attached to a trolley on 4 wheels, move along the bed forward and backward, performing the same movements as in a boat on smooth water. For a kayaker: when working on this simulator, athletes must sit on a slide (a seat similar to the seat located in a kayak two in smooth water) attached to a cart on 4 wheels, move forward and backward along the frame, performing the same movements as in a boat on smooth water.
The simulator is made of a steel profile, a steel shaft, a cast-iron pulley with accessories from cables and a rubber bundle.
The simulator has an aerodynamic load block for the possibility of reducing or increasing the force on the "paddle" during operation. The simulator is equipped with a moving kayak cart and a canoe cart. 2 oars are also supplied: for canoeing and kayaking. The trolley on special rollers must move on the bed without external interference.
Together with the simulator, a set of loads of 2 pcs. 2 kg each, 1 pc. 1 kg, 1 pc. 0.5 kg each.
A simulator for simulating and improving rowing techniques. Designed for the development and improvement of the technique of dragon rowing, as well as for the development of special physical training for athletes and testing athletes for special physical fitness in rowing with dragons. When working on this simulator, the athlete, sitting on a special platform, must perform similar movements as in a boat on smooth water.
The simulator should be made of steel profile, steel shaft, cast-iron pulley with accessories from cables and rubber harness.
The simulator has an aerodynamic load block that reduces or increases the force on the "paddle", a bed, an oar simulator for the dragon, an emphasis for the "front" leg and an emphasis for the "back" leg.
A simulator for simulating and improving rowing techniques. Designed for the development and improvement of rowing techniques, as well as for the development of special physical training of athletes and testing athletes for special physical fitness of slalom rowers. When working on this simulator, an athlete must, standing on a special platform, perform similar movements as in a boat.
The simulator should be made of steel profile, steel shaft, cast-iron pulley with accessories from cables and rubber harness.
The simulator has an aerodynamic load block, which reduces or increases the force on the "paddle", a bed, a canoe paddle simulator, an emphasis for feet, adjustable depending on the anthropometric data of the athlete.
Ironkayak
A simulator for simulating and improving the technique of kayaking with a moving trolley, designed to develop the technique of rowing on a kayak, as well as for the development of special physical training and testing athletes. When working on this simulator, an athlete must sit on a side view (a seat similar to a device located in a kayak alone on smooth water), attached to a cart on 8 wheels, to move forward and backward along the frame.
The simulator is made of a steel profile, a steel shaft, a cast-iron pulley with accessories from cables and a rubber bundle. The simulator has an aerodynamic load block, to reduce or increase the force on the "paddle" during the athlete's work. The simulator is equipped with a moving trolley. The cart on special rollers must move along the bed without external interference.
A set of weights is supplied with the simulator: 2 pcs. 2 kg each, 1 pc. 1 kg, 1 pc. 0.5 kg. Length 2.5 - 2.6m; Width - 0.6m; The weight of the simulator is 50-60 kg.
Ironkayak on wheels
A simulator for simulating and improving the technique of kayaking. With this unique equipment you can:
-Diagnose the functional state of the body of athletes;
-conduct competitions and training, regardless of the availability of a suitable reservoir;
-increase the effectiveness of training athletes by introducing new principles of the training process.
The rowing machine allows you to optimize the training process when it is impossible to go out to the water. This development is aimed both at professional athletes in kayaking and canoeing, rowing slalom, and for lovers who in the winter period are forced to refrain from training in smooth water for several months.
K-1 Compact PRO
Simulator for simulating and improving kayaking equipment. Designed to develop and improve the technique of kayaking, as well as for the development of special physical training of athletes and testing for special physical fitness in kayaking. When working on this simulator, an athlete must sit on a side view (a seat similar to a seat located in a kayak alone in smooth water) to perform similar movements as in a boat in smooth water.
The simulator is made of a steel profile, a steel shaft, a cast-iron pulley with accessories from cables and a rubber bundle.
The simulator has an aerodynamic load block for the possibility of reducing or increasing the force on the "paddle" during operation.
K-1 Compact FIT
It is intended for the advancing and improving canoeing technique, as well as for the developing a special physical training of kayakers and testing for a special physical condition in kayaking. When working on this training machine, a kayaker must sit on a sliding seat (a seat similar to the seat located in a single kayak in smooth water) attached to a cart with 10 wheels, and perform the same movements as in a kayak in smooth water.
The training machine is made of a steel profile, a steel shaft, a cast-iron pulley fitted with wire ropes and a rubber band.
The training machine has an aerodynamic load block allowing to reduce or increase force on the "paddle" when working. It is equipped with a moving cart. This cart must move on special rollers along the frame without external interference.
Simulator for simulating and improving rowing techniques. Designed for the development and improvement of SUP Board rowing techniques, as well as for the development of special physical training. When working on this simulator, you need to stand on a special platform to perform similar movements as on a Board on smooth water.
IronSUP
Simulator for simulating and improving rowing techniques. With this simulator, you can correctly learn how to transfer force through your legs, which is very difficult to do on the water. Designed for the development and improvement of SUP Board rowing techniques, as well as for the development of special physical training. When working on this simulator, you need to stand on a special platform to perform similar movements as on a Board on smooth water.
SUP compact FIT
Simulator for simulating and improving rowing techniques. Designed for the development and improvement of SUP Board rowing techniques, as well as for the development of special physical training. When working on this simulator, you need to stand on a special platform to perform similar movements as on a Board on smooth water.
The training machine is made of a steel profile, a steel shaft, a cast-iron pulley fitted with wire ropes and a rubber band.
Ski and SUP ergometer
Simulator has an aerodynamic load block, additionally there is a magnetic brake.
The simulator provides adjustment of the guide rollers both vertically and horizontally, for more effective use by athletes. This function allows you to adjust the simulator for your sport, as well as for your anthropometric data.
Additionally, you can complete the simulator:
- paddle for SUP surfing
- spring-loaded platform for SAP surfing
- canoe paddle
- paddle kayak
WHY PEOPLE CHOOSE US
1
SUITABLE FOR EVERYONE
Our equipment is designed for every sport enthusiasts (from a beginner to a pro athlete)
2
EASY TO ADJUS
Our machines are simple to be set for any level of resistance from sprint (maximum pace) to stayer (monotonous rowing at a low and medium pace).
3
EXCLUSIVE
We are the only producers of boats like two-place-kayak and two-place-canoe in the world. The equipment is unique because the athletes not only drill visual coordination, but also learn to depend on each other, like in a real boat.
4
RELIABILITY
Our primary task is to provide safe and quality assistance both for pro athletes and beginners.
5
UNIQUE EXERCISE MACHINES
In our stores we have one-of-a-kind licensed machines. One of the most interesting is kayak on the wheels -Ironkayak-2
6
LONGSTANDING USAGE
Exercise machines will last great while and will not fail you in the most crucial moment.
ABOUT US
We are USM company, the largest manufacturer of kayak-canoe ergometersin the Russian Federation.
Our founder and designer is the acting trainer Usmaev Anatolyj Ivanovich. Together we produce the improved exercise machines, which replicate rowing technique on the water.
Today we present not only unique simulators: in our range you can find a boat, paddles, component parts, SUPs, branded merchandise and, of course, exclusive machines.
It is crucial for us to make it possible for every athlete to fully engage in professional sports. And it will be much more efficient with the best equipment.
When you choose for USM simulatorsyou can rest assured you receive high quality straight out.
REVIEWS
"I am exercising with USM machines - they are of a high quality and very professional. They are irreplaceable during the contest and usual seasons. The most compelling thing about them is that they are suitable as to a drill of strength building so to a long rowing session for increasing stamina, thanks to resistance adjustment."
Ilya Pervukhin
The Olympic Games medalist
"Excellent simulator. Quiet, rigid, convenient for workout, smooth in pulling. One of the most comfortable simulators I used to try out!"
Ilya Shtokalov
The Olympic Games medalist
"The key difference from previous models is a quick set-up for any level of trainings. Smooth pulling without any jerks or jumping. Timely backslide of the cord at any pace. Thanks to counterweight and aerodynamic load bank simulator can be adjusted to any type of training. It is also very compact, easy to be unfolded and set up."
Kostuchenko Y. Y.
Trainer of the national team of the Russian Federation for canoeing Honoured trainer of the USSR
USM COMPANY EXERCISE MACHINES
Do you have any questions?
We gladly answer them. Leave your details and we will contact you shortly.
By clicking the "Submit" button, you agree to the processing of your personal data.